When you are configuring the Wi-Fi connection, the process might fail and loop you back to the beginning where it asks you to connect to Themo Wi-Fi again. After that, you are unable to complete the Wi-Fi setup.
The most common problems why it happens are:
- Your phone mobile data is switched ON.
- Your Wi-Fi password is incorrect.
- You have moved too far from Themo and your phone has lost connection to the device.
To resolve the problem, please do the following:
1. Fully close the app and then open it again (restart the app).
2. Move to Wi-Fi configuration.
3. Once you have started again the step 1/3 of Configuring Themo: "Connect to Themo's Wi-Fi" (see picture above), do the following:
3.1. Shut off the mobile data of your phone (it might cause switching between networks).
3.2. Make sure you enter the correct Wi-Fi password (this is the most common mistake).
3.3. Do not move further than 5 meters from your Themo thermostat during the process.
If this still does not resolve your problem, please contact [email protected]
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article