With Themo Smart Schedule function your cost for heating is kept as low as possible. All you have tot do is set a preferred temperature when you are at home. 


Creating and using a Smart Schedule function is possible only when the device is connected to the internet via local WiFi network. 


When connecting your Themo for the first time via mobile app you will be asked to create a new schedule, but it is possible to create or add new schedule at any time. 


To create a new schedule go to the Room Screen of the room you wish to add schedule for. Click to arrow down in the bottom of the screen to go to Modes and Schedules view. 




In the Modes and Schedules screen all the schedules that you create for this device are listed in there. Also a shortcut for 2 manual modes are listed. 


You can create up to 5 different schedules for one room, but only one schedule can be active at any time. To add new schedule click Add new schedule button.


We have already pre-made some schedules for you. You can pick and edit any of these or use them as a starting point for your own schedule at any time. 


Tap the ... button to use or edit the pre-made schedule.  


To create a completely new schedule from the scratch tap the Create new schedule button



In the Schedule Editor you can set an individual time-blocks for the desired temperature for the floor. Tap on anywhere on the Day block to start creating time-blocks. 


In the Time-block Editor select the start time From when the floor should be in the desired temperature. Tap on the selector to save selection. Then select the Until time for the floor to be heated. Tap again on the selector to save selection. Finally select the desired Minimum Temperature for the floor to be heated. 


Please note that the Minimum Temperature  can't exceed the Maximum Temperature Limit set for the floor. By default this is 30 degrees, but you can change it from the Room Settings.


Save the Time-block when completed. 


It is possible to use the Copy and Paste function from the top row to quickly copy time-blocks from one day to another. 


If you completed your schedule then tap the Save schedule button to save this schedule to your schedules list. If you did not fill out all the time-blocks then the app will Autofill schedule them for you with default value of 15 degrees.


Finally give your schedule a unique name and tap the Name schedule button.