Reset WALL device Wi-Fi access

Looja: Themo Support, Muudetud L, 24 Aug kell 9:48 autor Themo Support

If you are experiencing persistent issues with your Themo WALL device, resetting it to its factory settings and reconfiguring Wi-Fi access may help resolve the problem. You may need to reset and reconnect to your wireless network if you change your wireless router or wireless network settings (such as your wireless name and/or password). This may also be necessary if you are moving into a home where the previous occupant installed a Themo.


Note! If you plan to move, don't reset the Themo yourself, let the new occupant do it! If you turn off the Wi-Fi network, Themo can no longer be controlled wirelessly.


If you are installing a completely new device, start by installing the mobile app and add new device from the app. Follow the onscreen instructions to complete configuration.

 

Instructions to reset WALL device Wi-Fi access


Step 1: Disable button lock

  • This is necessary only if button lock is enabled.
  • Option 1. Navigate to the settings menu within mobile app and disable the lock. Device > Settings > Child Lock
  • Option 2. Press and hold the MODE button on the DIN device for 12 seconds:


Step 2: Reset device to factory settings

  • Switch device into OFF mode by clicking front panel until lights are turned off. 
  • When in OFF mode, hold down the button for 15 seconds until the lights will turn BLUE/RED.
  • Device LED circle starts flashing red and white - device is in Configuration Mode


Step 3: Reconfigure the device


See a video to understand the steps visually: 



Kas see artikkel oli kasulik?

See on suurepärane!

Täname sind tagasiside eest

Vabandust! Me ei saanud abiks olla

Täname sind tagasiside eest

Anna meile teada, kuidas me saaksime seda artiklit täiendada!

Vali vähemalt üks põhjustest
Nõutud CAPTCHA kinnitus.

Tagasiside saadetud

Me hindame sinu jõupingutusi ning proovime seda artiklit täiendada