If you are experiencing persistent issues with your Themo WALL device, resetting it to its factory settings and reconfiguring Wi-Fi access may help resolve the problem. You may need to reset and reconnect to your wireless network if you change your wireless router or wireless network settings (such as your wireless name and/or password). This may also be necessary if you are moving into a home where the previous occupant installed a Themo.
Note! If you plan to move, don't reset the Themo yourself, let the new occupant do it! If you turn off the Wi-Fi network, Themo can no longer be controlled wirelessly.
If you are installing a completely new device, start by installing the mobile app and add new device from the app. Follow the onscreen instructions to complete configuration.
Instructions to reset WALL device Wi-Fi access
Step 1: Disable button lock
- This is necessary only if button lock is enabled.
- Option 1. Navigate to the settings menu within mobile app and disable the lock. Device > Settings > Child Lock
- Option 2. Press and hold the MODE button on the DIN device for 12 seconds:
Step 2: Reset device to factory settings
- Switch device into OFF mode by clicking front panel until lights are turned off.
- When in OFF mode, hold down the button for 15 seconds until the lights will turn BLUE/RED.
- Device LED circle starts flashing red and white - device is in Configuration Mode
Step 3: Reconfigure the device
- Themo has to be in Configuration Mode to have the Wi-Fi available for your phone to connect (Step 2).
- Open Wi-Fi Settings from the app to reconfigure Wi-Fi access
- See the how to instructions for Android
- See the how to instructions for iOS
See a video to understand the steps visually:
Auttoiko tämä artikkeli?
Loistavaa!
Kiitos palautteestasi
Pahoittelut ettemme voineet auttaa
Kiitos palautteestasi
Palaute lähetetty
Kiitos palautteesta. Yritämme korjata artikkelin